Is dexron 3 Mercon synthetic?

DEXRON® III/MERCON includes friction modifiers in the fluid additive package. Does Valvoline make a synthetic ATF? Yes. MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids.

Is Mercon and dexron III the same?

Dexron III is a General Motors trademark for qualified automatic transmission fluids. Mercon covers all automatic transmissions for Ford model year 1988 and after. LUBRIPLATE Dexron III/Mercon is designated as make-up and/or refill fluids to meet respective car warranties.

Can I use Mercon instead of dexron?

👉 For more insights, check out this resource.

In short, the answer is no, and it’s why you want to use an OE approved fluid specific to your car. Dexron fluids are used by GM. Ford and Mazda designed their transmissions for Mercon.

Is Mercon Va synthetic fluid?

SYNTHETIC BLEND MERCON® V AUTOMATIC TRANSMISSION AND POWER STEERING FLUID.

👉 Discover more in this in-depth guide.

Do they still make DEXRON 3?

Direct Replacement. Dexron VI fully replaces Dexron III and prior evolutions of the Dexron fluids. GM manufactured the liquid for compatibility with transmissions requiring earlier versions of the fluid. Dexron VI works in any vehicle that requires ATF-A (the original automatic transmission fluid) or a Dexron variation …

What replaces dexron III?

Dexron VI fully replaces Dexron III and prior evolutions of the Dexron fluids. GM manufactured the liquid for compatibility with transmissions requiring earlier versions of the fluid. Dexron VI works in any vehicle that requires ATF-A (the original automatic transmission fluid) or a Dexron variation.

Is transmission fluid and power steering fluid the same?

Power Steering Fluid versus ATF: Is power steering fluid exactly the same as transmission fluid? No, but they’re the same type of fluid. ATF, however, contains friction modifiers and detergents to clean out the automatic transmission’s dirt and grease away yet damage the hydraulic valves of the steering rack and pump.

What replaces DEXRON III?

What is the difference between Dexron VI and Mercon V?

General Motors is currently on its Dexron VI specification, while the modern Ford spec is Mercon V. Chrysler uses ATF+4. The difference between these fluids lies mainly in their friction modifiers. Mercon ATF historically allowed for more component friction at slower speeds, while Dexron’s modifiers allowed for higher friction at higher speeds.

Is Mobil 1 Synthetic ATF the same as Dexron III?

Mobil 1 Synthetic ATF meets the requirements of several different manufacturers, including GM’s Dexron III and Ford’s Mercon V specs. However, it does not conform to GM’s newer Dexron VI requirements. Being a fully synthetic fluid, Mobil 1 Synthetic ATF has remarkable cold-temperature flow and a high viscosity index of 176.

What is the difference between Mercon ATF and Dexron ATF?

The difference between these fluids lies mainly in their friction modifiers. Mercon ATF historically allowed for more component friction at slower speeds, while Dexron’s modifiers allowed for higher friction at higher speeds.

Is Mercon V fluid compatible with earlier versions of Mercon?

Early versions of Mercon V had limited backward compatibility, but Ford corrected the problem. Both fluid types can be used to top off a system running any of their earlier versions, and a full drain can be done without the need for a system flush.