What size rear end is in a Ford Ranger?
The ford ranger 8.8 Has a rear end width of 56.5 To 58.5″ Depending on the model.
What Ford vehicles have an 8.8 rear end?
8.8 IRS (Independent Rear Suspension) The 8.8 IRS first saw use in the 1989 model year Ford Thunderbird and later Ford adapted independent suspension to its 3rd generation Explorer and 2nd generation Expedition SUVs. The Mustang first used the 8.8 IRS on 1999-2004 Cobra models.
Are all Ford 8.8 rear ends the same?
First appearing in 1977, the 8.8 is found in almost all Ford V8 cars from ’86 on, and in V6 Rangers and Explorers. There are 24 different Fords that offered the 8.8 rear axle. The 31-spline axles (1.29 inches in diameter) are more desirable but far less common.
👉 For more insights, check out this resource.
How can you tell the difference between a Ford 7.5 and 8.8 rear end?
The 8.8″ has sides that are all equal, so it looks like a square with rounded off edges. A 7.5″ has got round sides, and the top and bottom are “Flat”.
👉 Discover more in this in-depth guide.
What is a 7.5 rear end?
The GM 10 Bolt 7.5 rear end, also known as the AAM 7.5, GM 7.6, and GM 7.625 rear end was the most common housing used in GM G-body car vehicles. It featured a 7.5 inch diameter ring. The GM 7.625 version used a slightly larger 7.625 diameter ring gear.
How much does a Ford 8.8 weight?
Ford Motorsports website has the weight of a bare 8.8 axle at 135 pounds or so.
Is a Ford 8.8 the same as a Ford 9-inch?
A Ford 9-inch has a ring-gear diameter of, you guessed it, 9 inches closely followed by the 12-bolt at 8.875, with the Mustang rear at 8.80 inches. Here, the 8.8 and the 12-bolt are identical at 1.625 inches and in fact use the same pinion bearings.
How wide is a Ford 8.8 rear end?
8 rear end width iS59 11/44 inches. The Ford 8.8 is an automotive axle manufactured by Ford Motor Company at the Sterling Axle Plant in Sterling Heights, MI. It was first used in the model year 1983 Ford trucks. The axle was developed to replace the Ford 9-inch axle.
What is the axle size of a Ford Ranger?
All Ford Rangers came with a 7.5-Inch axle from 1983-1989. From 1990-2011, all 4.0L Ford Rangers came equipped with a 8.8-Inch axle.
What are the measurements of a 1983 Ford Ranger?
Do you need to know the measurements of a stock Ford Ranger: 1983-1992 Ford Ranger: 1983-1992 Ford Ranger Vehicle Dimensions Regular cab short bed (6′) Regular cab long bed (7′) Extended cab (First Super Cab was 1986) Wheelbase, in. 107.9 113.9 125.0 Overall Length, in. 175.6 (1983-1988) 176.
What are the dimensions of a 1997 Ford Ranger?
1993-1997 Ford Ranger Vehicle Dimensions Regular cab short bed (6′) Regular cab long bed (7′) Extended cab Wheelbase, in. 107.9 113.9 125.2 Overall Length, in. 184.3 196.3 198.2 Overall Width, in. (excluding mirrors) 69.4 69.4 69.4 Overall Height, in. 64.3 64.3 64.3
What is the difference between a 1983 Ford Ranger and Bronco?
The early 1983-1992 Ranger axles are 1-inch shorter than the 1993-up pieces (Both sides). This means that the an entire Ranger axle assembly from 1993-up is 2-inches wider than 1983-1992. The right side Bronco II axle shaft is 1-5/8″ wider than the 1983-1992 Ranger shaft.
